ANSI/AWS B2.1-8-212-2012 主要用于管道的、在ER3XX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的标准焊接程序规范(WPS)

上一篇: ANSI/AWS B2.1-1-211-2012 主要用于管道的,在焊接或PWHT条件下,(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚,INMS-1和ER70S-2及E7018碳钢的金属保护电弧焊之后的带熔化垫材的钨电极惰性气体保护焊用标准焊接程序规范(WPS)
下一篇: ANSI/AWS B2.1-1-210-2012 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS-1和ER70S-2碳钢的带熔化垫材的钨电极惰性气体保护焊

【英文标准名称】:FireTestforHeatandVisibleSmokeReleaseforDiscreteProductsandTheirAccessoriesInstalledinAir-HandlingSpaces
【原文标准名称】:离散产品及其配件安装在空气处理空间的热和可见烟雾释放用火灾试验
【标准号】:ANSI/UL2043-2008
【标准状态】:现行
【国别】:美国
【发布日期】:2008
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:附件;气室;空气处理装置;燃烧试验;热学;安装的;释放;烟;可见的
【英文主题词】:Accessories;Airspaces;Airtreatmentdevices;Firetests;Heat;Installed;Release;Smoke;Visible
【摘要】:Thefollowingarebeingrecirculated:1)Revisiontoductsizein3.4.2.2)RevisiontoTotalSmokeReleasedCalculationin7.3A.1.3)RevisionforconsistentreferencetoSpecimenSmokeReleaseRatein7.4.1,8.2,and9.1.
【中国标准分类号】:C80
【国际标准分类号】:13_220_50;91_140_30
【页数】:
【正文语种】:英语


Product Code:SAE J1352
Title:Compression and Recovery of Insulation Paddings
Issuing Committee:Acoustical Materials Committee
Scope:This test method is applicable for determining the relative compression and recovery of fibrous insulation padding materials.The purpose of this testing method is to establish a means of measuring the ability of fibrous insulation materials to resist compression and recover after being compressed, dry or wet. It should be noted that there are two test methods for each dry and wet test. Two methods have been found necessary for different loading applications, and also due to large variation in surface density of the padding materials. The results of these two test methods cannot be correlated to each other. The material specification should indicate which test is necessary for each application.